WOWSPORT Bike Kickstand, Adjustable Aluminium Alloy Kickstand 33‑38cm
Fits Most Bikes, Adjusts In Seconds — Extends From 33Cm To 38Cm To Fit 20/22/24/26/27.5In Mountain Bike Wheels And 451/650C Road Bike Wheels. Check Your Tyre Sidewall For The Size Marking (E.g. 27.5X2.10) Before Ordering To Confirm Fitment.
- Fits Most Bikes, Adjusts In Seconds — Extends from 33cm to 38cm to fit 20/22/24/26/27.5in mountain bike wheels and 451/650C road bike wheels. Check your tyre sidewall for the size marking (e.g. 27.5x2.10) before ordering to confirm fitment.
- Aircraft-Grade Aluminium, Baked Paint Finish — Built from durable aluminium alloy that resists rust and corrosion. The baked-on paint coating stays smooth and vibrant without chipping or peeling, even after months of daily use.
- Triple-Screw Mounting For A Rock-Solid Hold — Secured with 3 stainless steel hex bolts and 2 rubber pads that grip your frame tightly, reducing slippage and preventing the repeated paint scratching that loose kickstands cause.
- Wide Anti-Slip Rubber Foot For Stable Parking — A wider, thicker non-slip rubber foot increases ground contact and friction, keeping your bike upright and stable on pavement, gravel, or uneven ground.
- Easy Diy Install, Two Hex Keys Included — Installs in minutes with the included 4mm and 5mm hex keys. The reinforced rivet pivot joint keeps folding and deploying smooth and durable over time.
You'll be taken to Amazon.com.au to complete your purchase — Prime delivery and Amazon-protected checkout.
Buying a few things? Add them to a list, then send the whole list to your Amazon basket at checkout.
- Fast dispatch & Prime delivery via Amazon
- Hassle-free returns through Amazon
- Backed by the 2-year WOWSPORT warranty
- Stable when loadedWide footprint, no tip-over in wind.
- Bike-safe contactPadded points where it touches the frame.
- One-person assemblyHardware and tool in the box.
- Bolts to floor or wallStays put in a busy garage.
Why riders pick the Alloy Kickstand 33–38cm
A stand that holds on any surface
- Wide rubber foot grips pavement and gravel
- Bike stays upright on uneven ground
- No more leaning it against a wall
Adjusts 33–38 cm to fit your frame
- Loosen, slide, tighten
- One stand covers a wide range of frames
- Centre-mount, clear of the cranks
Three stainless steel bolts
- Load spread across the bracket
- No single weak point
- Stainless steel, no rust stains on paint
Two rubber pads protect your paint
- Sit between bracket and frame
- Protect paint and decals
- Stop the stand twisting under load
Find your wheel size in five seconds
- The tyre sidewall prints the size, e.g. 27.5x2.10
- Fits 20–27.5 inch wheels
- Check before you order
Stocked in Amazon.com.au warehouses and dispatched with tracking, covered by the A-to-z Guarantee.
Run by the team that designed it. Replacement parts ship from our own stock, not special-ordered.
Wrong fit or changed your mind? Send it back through Amazon within 30 days.
You pay Amazon, not us — your card details never touch this site.
Frequently Asked Questions
Fitment, maintenance and shipping — the questions we answer most often for this product.
What is the WOWSPORT Bike Kickstand, Adjustable Aluminium Alloy Kickstand 33-38cm designed for?
Fits Most Bikes, Adjusts In Seconds — Extends From 33Cm To 38Cm To Fit 20/22/24/26/27.5In Mountain Bike Wheels And 451/650C Road Bike Wheels. Check Your Tyre Sidewall For The Size Marking (E.g. 27.5X2.10) Before Ordering To Confirm Fitment.
How do I know which kickstand length fits?
Read the wheel size off your tyre sidewall — 26x2.10, 27.5x2.25, 700x32 and so on. Our adjustable stand covers 20, 22, 24, 26 and 27.5 inch mountain bike wheels and 451 or 650C road wheels, extending from 33cm to 38cm.
Will a centre-mount kickstand fit my frame?
It needs a flat mounting plate behind the bottom bracket with two bolt holes, which most hybrid, mountain and commuter frames have. Carbon frames and some full-suspension designs do not, and should not be clamped — check before ordering.
Can I fit a kickstand to a carbon frame?
Not with a clamp-on or bolt-on stand unless the frame has a dedicated mounting plate designed for it. Carbon tubes are not built for point loads, and crushing a stay is an expensive mistake. Use a rear-axle or chainstay-mounted stand instead.
Will the stand scratch my frame?
The mounting plate and bolts are the contact points, and the stand ships with a protective pad. Tighten to the torque marked on the bolt rather than as hard as possible — overtightening is what damages paint and threads.
Does a kickstand affect handling?
A centre-mount stand adds around 200 to 300 grams low on the frame, which you will not feel while riding. The spring-loaded leg retracts against the stay, so it does not catch on kerbs or trail obstacles.
